Supported Phones

CISCO SPA504G

What's on the CISCO SPA504G?

 

Cisco SPA504G IP Phone - MF Communications

CISCO SPA504G Model

 

Part of the Cisco Small Business Pro Series, the SIP-based Cisco SPA504G 4-Line IP Phone ensures comprehensive interoperability with leading VoIP infrastructure, enabling quick rollout of feature-rich services. With hundreds of features, including easy station moves and shared line appearances, the SPA504G meets traditional business needs while leveraging IP telephony advantages. It supports productivity-enhancing features like VoiceView Express and Cisco XML applications with the Cisco Unified Communications 500 Series in SPCP mode. The phone features Power over Ethernet (PoE), a monochrome backlit display, dual switched Ethernet ports, and wideband audio for superior voice clarity. It also supports secure remote provisioning, web-based configuration, and expansion with up to two Cisco® SPA500S Modules. Compatible with SIP and SPCP, the SPA504G is a dependable, affordable, and feature-rich IP phone.

Important:

    1. If the phone is not new and has previously been connected to another PBX system, it must be reset first.

    2. Avoid using special characters in extension names or BLF labels.

    3. If you want to upgrade the firmware, follow this instruction. See: Upgrade firmware

 

How to identify the MAC Address of CISCO SPA504G?

 

1. To identify the MAC address and Phone Model of the IP Phone, you may take a look at the back of the Phone.

2. You can also identify to screen of IP Phone by Setup Button > Product Info

3. In Web Portal, click System Section.

 

How to identify the IP Address of CISCO SPA504G?

 

    1. To identify the IP address of the IP Phone, use the any 3rd Party LAN Scanner App. 

    2. In Web Portal, click Voice Tab > Info.



 3. In Web Portal, click System Section.

      

 

Manual Provisioning for CISCO SPA504G


RingQ will generate provisioning information for the phone and make it accessible via the provisioning data. The phone is required to connect to this server to obtain its configuration information and authentication details. Here’s the procedure on how to provisioned IP Phone:

 

Open any Web Browser then type the given IP Address of the IP Phone. (e.g., https://your_ip-phone_ipaddress)
Make sure that you will access in ‘Admin Login’ to display the full configuration of the Extension


                                                                          Fig. 1: CISCO WebUI (Voice Tab) 

Go to Voice Tab > Ext 1, then configure the following:
(Note: If you need to configure other Ext, you may choose any available Ext number)

o   General

1.     Line Enable: Choose ‘Yes’

o   Proxy and Registration

2.     Proxy: The provide FQDN of RingQ

3.     Register: select ‘Yes’

o   Subscriber Information

4.     Display Name: Any Text (e.g., 107 | JS)

5.     Password: Auth Password provided from the portal

6.     User ID: Auth Username provided from the portal


                                                                          Fig. 2: CISCO WebUI (Voice Tab > Ext Section) 

To get the Username and Password, Click the Account > Extensions and select the user.


                                                                          Fig. 3: RingQ Instance ( Account > Extension Section) 


                                                                                  Fig. 4: RingQ Instance (Extension Page) 

 

Then copy the credentials and paste it to Username and Password area. Lastly, click ‘Submit All Changes’. It takes 50 seconds to apply changes of the IP Phone.